sysdat.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
2-67
Nur für den internen Gebrauch
System Data
Dynamic Configuration Rules
2.5.4
Example for Using the Thumb Rule
Using a standard configuration, the following example illustrates a calculation based on the
thumb rule.
2.5.4.1
HiPath 3000/5000 V9 Configuration
The calculations are made using default traffic values. The thumb rule produces the following
results:
According to Table 2-34, 22,600 points are available for HiPath 3800. Implementation with Hi-
Path 3800 is, consequently, possible.
Number
Type
100 Anate
(analog telephones, terminal devices)
100
Digital terminal devices
20
Digital terminal devices with CTI-controlled functions
20
IP phones
1
Call pickup group consisting of two analog telephones and eight digital telephones
5
ACD agents of digital telephones with 32 calls per hour and display update every
5 seconds
2 Attendant
consoles
60
Digital trunks to CO, of which 5 are for ACD application
30
Digital trunks to other systems via TDM (CorNet-N)
100 · 3,4 +
Anate
(100 + 20) · 6.3 +
Digital devices, but without ACD agents
20 · 7.3 +
IP phones
5 · (179 / 5 + 65 · 32 / 16) + ACD agents (32 calls per hour and agent, i.e. C = 32/16)
1 · 4,8 +
One ACD group
2 · 252 +
Attendant consoles
55 · 22.9
Digital trunks minus the 5 ACD trunks
30 · 18.9 +
Networking trunk via TDM
20 · 1.7 +
Additional overhead for the 20 CTI-controlled terminal devices
1 · (0,06 · 9 · 10 + 0,48 · 9 · 8) Call pickup group
= 4,480
Total number of points
Summary of Contents for HiPath 3000 Series
Page 1252: ......
