start_h3.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
5-9
Nur für den internen Gebrauch
Starting Up HiPath 3000
Starting Up HiPath 3800
5.1.5
Not for U.S.: Entering the System Number
Introduction
Corresponding to the configuration, the system station number must be entered (without the
DID number or attendant code) on the system telephone that is assigned 100 as its internal
station number.
The system station number is determined by the network or service provider.
Depending on the configuration type, system station numbers should not be entered for
point-to-multipoint operation or for tie trunks to HiPath 4000, for example.
Example
Port number: 98008
National number: 2302 (prefix without 0)
International number: 49 (country code)
Station number type: international
Input procedure
Table 5-4
Entering the System Number
Step
Input
Description
1.
*95
System administration code
2.
Service
User name (identification)
3.
XXXXX
Enter password
4.
Watch the display.
Scroll until “ISDN parameters” and “System station number”
appear.
Confirm your selection.
OR:
Expert mode: Enter the code 20 2 1 to 4.
5.
Follow the user prompting on the display.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
