Rohde & Schwarz FPC1000, User Manual

Page: 60 / 291

Measurement Wizard
FPC1000
45
User Manual 1178.4130.02 ─ 02
8 Measurement Wizard
The measurement wizard is a tool that allows you to combine several individual mea-
surement configurations to a sequence of measurements (or measurement set). Each
individual measurement configuration is based on a dataset that you have previously
saved. Because all relevant parameters have been defined before the actual measure-
ment and cannot be changed once the measurement procedure has begun, the wizard
is a good way to avoid mistakes and save time when setting up measurements.
This topic describes the functionality of the measurement wizard. For details on the
individual measurements you can perform with the wizard, refer to the corresponding
chapters.
●
Chapter 9, "The Spectrum Application" , on page 52
●
Chapter 10, "The Receiver Application" , on page 111
●
Chapter 11, "Analog Demodulation" , on page 122
●
Chapter 12, "Digital Demodulation" , on page 133
You can use the wizard for measurements in all available applications.
Note that it is necessary to install and use the R&S
InstrumentView software package if
you want to access and use the measurement wizard.
Before you can use the measurement wizard, you have to define a measurement set
with the R&S InstrumentView software package and transfer it to the R&S FPC1000.
The R&S InstrumentView software package is available for download on the
R&S FPC1000 website at http://www.rohde-schwarz.com/product/fpc1000 .
Creating a measurement set
A measurement set consists of several datasets. A dataset is a file that contains the
settings of a specific R&S FPC1000 configuration, for example frequency, scaling etc.
To get hold of a dataset, set up the R&S FPC1000 as you need and save the configu-
ration or use one of the predefined datasets.
For more information about how to create measurement sets, see
"Saving datasets"
on page 41.
1. Start the R&S
InstrumentView software on your PC.
2. Open the "Wizard Set" editor in the software ("Preparation" > "Wizard Sets").
The R&S InstrumentView opens a dialog that provides all functionality to manage
measurement sets.
3. Create a new measurement set from scratch or open an existing measurement set
to edit that set.
Define global characteristics of the measurement set in the "Global" category.
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com