Preset
FPC1000
31
User Manual 1178.4130.02 ─ 02
5 Preset
Access
: "Preset"
Access
(preset configuration): "Setup" > "User Preference"
Access
(factory reset): "Setup" > "Instrument Setup"
Remote commands required to preset the system:
●
Before you prepare a measurement, it is recommended to preset the R&S
FPC1000.
During a preset, the R&S
FPC1000 resets all settings to their default state. Restoring
the default configuration has the advantage that old settings do not affect measure-
ments.
The default setup depends on the application you are using.
Presetting the system
1. Press the "Preset" key to restore the default instrument configuration.
You can also define your own default settings via a dataset. The R&S
FPC1000
restores the configuration stored in the dataset after you press the "Preset" key
instead of the factory defaults.
2. Press the "Setup" key to open the setup menu.
3. Select the "User Preference" menu item to open the user preference dialog box.
4. Select the "Preset Mode" menu item to select the preset mode.
● "Default"
Restores the factory default configuration.
● "User"
Restores custom default values taken from a dataset. In that case, you have to
select a dataset that contains the default values.
5. Select the "Preset Dataset" menu item to select a dataset.
When you preset the R&S
FPC1000, it applies the configuration of the dataset.
In addition to the preset, you can also reset the system to the condition it had when it
was delivered (factory reset).
Potential data loss
Note that when you reset the R&S
FPC1000 to the factory state, all files you have
saved on the internal memory of the R&S
FPC1000 will be deleted. Only the files that
were included in the delivery will be kept.
Resetting the system
1. Press the "Setup" key to open the setup menu.
北京海洋兴业科技股份有限公司（证券代码：839145）
www.hyxyyq.com
