Rohde & Schwarz FPC1000, User Manual

Page: 158 / 291

Remote Control
FPC1000
143
User Manual 1178.4130.02 ─ 02
13 Remote Control
● Remote Control Basics ......................................................................................... 143
● Common Commands ............................................................................................ 158
● Preset ....................................................................................................................162
● Network Connection ..............................................................................................163
● System Configuration ............................................................................................164
● Display Settings .................................................................................................... 169
● Audio Settings .......................................................................................................169
● Data Management .................................................................................................170
● Applications ...........................................................................................................179
● Remote Commands of the Spectrum Application ................................................. 179
● Remote Commands of the Receiver Application .................................................. 229
● Remote Commands of the Analog Demodulation .................................................236
● Remote Commands of the Digital Demodulation ..................................................244
● Status Reporting System ...................................................................................... 253
13.1 Remote Control Basics
● Introduction ........................................................................................................... 143
● Remote Control Connection ..................................................................................146
● Instrument Model and Command Processing .......................................................147
● SCPI Command Structure .....................................................................................148
● Command Sequence and Synchronization ...........................................................156
● Suffix Overview ..................................................................................................... 158
13.1.1 Introduction
The R&S FPC1000 supports two different interfaces for remote control.
●
LAN Interface
The protocol is based on TCP/IP and supports the VXI-11 standard.
●
USB Interface
The connectors for both interfaces are on the rear panel of the R&S FPC1000and
allow for a connection to a controller for remote control via a local area network (LAN)
or directly via USB.
SCPI
SCPI (Standard Commands for Programmable Instruments) commands - messages -
are used for remote control. Commands that are not taken from the SCPI standard fol-
low the SCPI syntax rules. The instrument supports the SCPI version 1999. The SCPI
standard is based on standard IEEE 488.2 and aims at the standardization of device-
specific commands, error handling and the status registers. The tutorial "Automatic
Measurement Control - A tutorial on SCPI and IEEE 488.2" from John M. Pieper (R&S
Remote Control Basics
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com