Rohde & Schwarz FPC1000, User Manual

Page: 199 / 291

Remote Control
FPC1000
184
User Manual 1178.4130.02 ─ 02
Suffix:
<n>
.
irrelevant
<m> irrelevant
Parameters:
<DisplayMode>
CLR
Display the currently measured value ("Clear / Write").
MAX
Display the highest measured value ("Max Hold").
*RST:
CLR
Example:
//Select clear/write trace mode
CALC:MARK:FUNC:CPOW:MODE CLR
CALCulate<n>:MARKer<m>:FUNCtion:CPOWer:UNIT
<Unit>
This command selects the unit of the for channel power measurements.
Prerequisites for this command
●
Select the channel power measurement (
CALCulate<n>:MARKer<m>:
FUNCtion:POWer:SELect
).
Suffix:
<n>
.
irrelevant
<m> Marker
Parameters:
<Unit> DBM | DBMV | DBUV | VOLT | WATT | V | W
*RST:
DBM
Example:
//Select the unit for the channel power
CALC:MARK:FUNC:CPOW:UNIT DBM
CALCulate<n>:MARKer<m>:FUNCtion:POWer:RESult:PHZ
<State>
This command turns the display of the channel power in a 1 Hz bandwidth on and off.
Prerequisites for this command
●
Select the channel power measurement (
CALCulate<n>:MARKer<m>:
FUNCtion:POWer:SELect
).
Suffix:
<n>
.
irrelevant
<m> irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST:
OFF | 0
Example:
//Display the measured channel power in a 1 Hz bandwidth
CALC:MARK:FUNC:POW:RES:PHZ ON
Remote Commands of the Spectrum Application
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com