Rohde & Schwarz FPC1000, User Manual

Page: 249 / 291

Remote Control
FPC1000
234
User Manual 1178.4130.02 ─ 02
13.11.7 Traces
Commands to configure traces described elsewhere.
●
Trace mode:
DISPlay<n>[:WINDow]:TRACe<t>:MODE
●
Memory trace:
DISPlay<n>[:WINDow]:TRACe<t>:MEMory[:STATe]
●
Data format of trace export:
FORMat[:DATA]
[SENSe:]DETector<t>[:FUNCtion]
....................................................................................234
DISPlay[:WINDow]:TRACe:STYLe
...................................................................................234
[SENSe:]DETector<t>[:FUNCtion]
<Detector>
This command selects the detector.
Suffix:
<t>
.
irrelevant
Parameters:
<Detector> AVERage | POSitive | QUASipeak | RMS
*RST:
POSitive
Example:
//Select quasipeak detector
DET QUAS
DISPlay[:WINDow]:TRACe:STYLe
<Style>
This command selects the style of the trace display.
Prerequisites for this command
●
Select frequency scan (
[SENSe:]FREQuency:MODE
).
Parameters:
<TraceStyle>
LINes
Shows the results in form of a line trace with interpolation
between the receiver frequencies.
POLYgon
Shows the results in form of vertical lines at each receiver fre-
quency.
*RST:
POLYgon
Example:
//Display a line trace
FREQ:MODE SCAN
DISP:TRAC:STYL LIN
13.11.8 Marker
Note that markers are only available for the frequency scan.
Remote Commands of the Receiver Application
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com