Instrument Setup
FPC1000
38
User Manual 1178.4130.02 ─ 02
6.6 Audio Settings
Remote commands required to configure the audio output:
●
Chapter 13.7, "Audio Settings"
Defining the key click volume
The key click volume defines the volume of the sound that the R&S
FPC1000 produ-
ces when you press a key or softkey.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Key Click Volume" menu item in the "Audio" category.
4. Select the volume that you prefer.
The volume is a percentage from 0
% to 100
% with 100
% being the loudest.
Defining the system beeper volume
The system beeper volume defines the volume of the system beeper. The system
beeper produces a sound, for example, if a message box turns up.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "System Beeper Volume" menu item in the "Audio" category.
4. Select the volume that you prefer.
The volume is a percentage from 0
% to 100
% with 100
% being the loudest.
Turning audio output in case of a power overload on and off
If the R&S
FPC1000 detects an overload at one of its inputs, you can configure it to
make a sound.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Beep On Power Overload" menu item in the "Audio" category.
4. Select the setting you prefer.
If on, the R&S
FPC1000 makes a sound every time it detects an overload.
Audio Settings
北京海洋兴业科技股份有限公司（证券代码：839145）
www.hyxyyq.com
