Rohde & Schwarz FPC1000, User Manual

Page: 245 / 291

Remote Control
FPC1000
230
User Manual 1178.4130.02 ─ 02
Prerequisites for this command
●
Select graphical result display (
CALCulate<n>:FEED
).
Return values:
<Results> Returns one value for each measurement point.
The type of value depends on the measurement (Hz for FM,
PCT for AM).
Example:
//Query FM results
CALC:FEED 'XTIMe:FM'
TRAC?
Usage:
Query only
13.11.2 Frequency
Commands to configure the frequency described elsewhere.
●
Frequency stepsize:
[SENSe:]FREQuency:CENTer:STEP
●
Frequency mode (frequency / channel):
[SENSe:]FREQuency:INPut:MODE
●
Channel selection:
[SENSe:]CHANnel
[SENSe:]FREQuency:CENTer
.........................................................................................230
[SENSe:]SCAN:STARt
................................................................................................... 230
[SENSe:]SCAN:STEP
.....................................................................................................231
[SENSe:]SCAN:STOP
.................................................................................................... 231
[SENSe:]FREQuency:CENTer
<Frequency>
This command defines the receiver frequency.
Prerequisites for this command
●
Select fixed frequency scan (
[SENSe:]FREQuency:MODE
).
Parameters:
<Frequency> <numeric value>
Default unit: Hz
Example:
//Define a receiver frequency for fixed frequency measurement
FREQ:MODE FIX
FREQ:CENT 100MHZ
[SENSe:]SCAN:STARt
<Frequency>
This command defines the start frequency for a frequency scan.
Prerequisites for this command
●
Select frequency scan (
[SENSe:]FREQuency:MODE
).
Remote Commands of the Receiver Application
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com