Rohde & Schwarz FPC1000, User Manual

Page: 217 / 291

Remote Control
FPC1000
202
User Manual 1178.4130.02 ─ 02
Example:
//Define a trigger delay
TRIG:SOUR EXT
TRIG:SLOP POS
TRIG:HOLD 500US
TRIGger[:SEQuence]:LEVel:VIDeo
<TriggerLevel>
This command defines the level of the video trigger.
Prerequisites for this command
●
Select span = 0 (
[SENSe:]FREQuency:SPAN
).
●
Select video trigger source (
TRIGger[:SEQuence]:SOURce
).
Parameters:
<TriggerLevel> <numeric value> (integer)
Range:
0 to 100 %
*RST: 50 %
Example:
//Define video trigger condition
FREQ:SPAN 0
TRIG:SOUR VID
TRIG:LEV:VID 50
TRIGger[:SEQuence]:SLOPe
<TriggerSlope>
This command selects the slope of the trigger signal.
Prerequisites for this command
●
Select an external trigger source (
TRIGger[:SEQuence]:SOURce
).
Parameters:
<TriggerSlope> POSitive | NEGative
*RST:
POSitive
Example:
//Select external trigger with a rising edge
TRIG:SOUR EXT
TRIG:SLOP NEG
TRIGger[:SEQuence]:SOURce
<TriggerSource>
This command selects the trigger source.
Remote Commands of the Spectrum Application
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com