Preparing for Use
FPC1000
9
User Manual 1178.4130.02 ─ 02
2 Preparing for Use
The R&S
FPC1000 is designated for use in industrial, administrative and laboratory
environments. Use the R&S
FPC1000 only for its designated purpose. Observe the
safety and usage instructions documented in the operating manual, as well as the
operating conditions and performance limits stated in the data sheet.
Make sure to consider the following information before using the R&S
FPC1000 for the
first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric shock, fire,
personal injury, or damage.
●
Do not open the instrument casing.
●
Read and observe the "Basic Safety Instructions" delivered as a printed brochure
with the instrument.
In addition, read and observe the safety instructions in the following sections.
Notice that the data sheet may specify additional operating conditions.
Risk of instrument damage
Note that the general safety instructions also contain information on operating condi-
tions that prevent damage to the instrument. The instrument's data sheet can contain
additional operating conditions.
Risk of electrostatic discharge (ESD)
Electrostatic discharge (ESD) can damage the electronic components of the instrument
and the device under test (DUT). ESD is most likely to occur when you connect or dis-
connect a DUT or test fixture to the instrument's test ports. To prevent ESD, use a wrist
strap and cord and connect yourself to the ground, or use a conductive floor mat and
heel strap combination.
For details, refer to the basic safety instructions delivered as a printed brochure with
the instrument.
北京海洋兴业科技股份有限公司（证券代码：839145）
www.hyxyyq.com
