Rohde & Schwarz FPC1000, User Manual

Page: 237 / 291

Remote Control
FPC1000
222
User Manual 1178.4130.02 ─ 02
Suffix:
<n>
.
irrelevant
<m> Marker
(Only marker 1 (M1) or delta marker 2 (D2) are possible to
select.)
Parameters:
<State> ON | OFF | 1 | 0
*RST:
OFF | 0
Example:
See
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:
RESult?
13.10.10 Display Lines
CALCulate<n>:DLINe
.....................................................................................................222
CALCulate<n>:DLINe:STATe
..........................................................................................222
CALCulate<n>:DLINe
<Position>
This command defines the position of a display line.
Prerequisites for this command
●
Turn on a display line (
CALCulate<n>:DLINe:STATe
).
Suffix:
<n>
.
irrelevant
Parameters:
<Position> <numeric value>
You can use any unit you want, the R&S
FPC1000 then con-
verts the unit to the currently selected unit. If you omit a unit, the
R&S FPC1000 uses the currently selected unit.
*RST: - (STATe to OFF)
Default unit: -
Example:
//Position display line
CALC:DLIN:STAT ON
CALC:DLIN –20dBm
CALCulate<n>:DLINe:STATe
<State>
This command turns display lines on and off.
Suffix:
<n>
.
irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST:
OFF | 0
Remote Commands of the Spectrum Application
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com