Rohde & Schwarz FPC1000, User Manual

Page: 231 / 291

Remote Control
FPC1000
216
User Manual 1178.4130.02 ─ 02
CALCulate<n>:MARKer<m>:X:SLIMits<slim>[:STATe]
<State>
This command turns marker search limits on and off.
If you perform a measurement in zero span, this command limits the evaluation range
on the trace.
Suffix:
<n>, <m>, <slim>
.
irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST:
OFF | 0
Example:
See
CALCulate<n>:MARKer<m>:X:SLIMits<slim>:RIGHt
CALCulate<n>:MARKer<m>:Y?
This command queries the absolute vertical position of a marker.
If necessary, the corresponding marker is activated first.
To get a valid result, you have to perform a complete sweep with synchronization to
the sweep end between activating the delta marker and reading out the result. This is
only possible in single sweep mode.
Suffix:
<n>
.
irrelevant
<m> Marker
Return values:
<Position> <numeric value>
The unit depends on
UNIT<n>:POWer
Example:
//Turn on single sweep mode and marker 2
INIT:CONT OFF
CALC:MARK2 ON
//Start a sweep and wait for the end
INIT;*WAI
//Query the position of marker 2
CALC:MARK2:X?
CALC:MARK2:Y?
Usage:
Query only
13.10.9 Marker Functions
CALCulate<n>:MARKer<m>:COUNt:FREQuency?
............................................................217
CALCulate<n>:MARKer<m>:COUNt[:STATe]
................................................................... 217
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLD
............................................. 218
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
............................................218
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
.......................................... 219
Remote Commands of the Spectrum Application
北京海洋兴业科技股份有限公司（证券代码：839145） www.hyxyyq.com