The Spectrum Application
FPC1000
102
User Manual 1178.4130.02 ─ 02
The R&S
FPC1000 opens a submenu to configure search range
1.
4. Select the "Lower Limit ..." menu item.
The R&S
FPC1000 opens an input field to set the lower limit of search range
1.
5. Enter the lower limit of the search range you want to use.
The R&S
FPC1000 draws a vertical line at the position you selected and labels it
with
1 (for search range
1).
6. Select the "Upper Limit ..." menu item.
The R&S
FPC1000 opens an input field to set the upper limit of search range
1.
7. Enter the upper limit of the search range you want to use.
The R&S
FPC1000 draws another vertical line at the position you selected and
labels it with
1 (for search range
1).
Figure 9-18: Marker search range lines
8. To use search range
1 for measurements, select the "Set to Search Range 1"
menu item.
The R&S
FPC1000 then uses the search range for the "Set To Peak", "Set To Next
Peak", "Set To Minimum" and "All Marker To Peak" functions and positions the
markers or delta markers inside this range.
Note:
You can also define a second marker search range by selecting the "Search
Range 2" menu item and repeating the other actions the same way.
Turning off marker search ranges
1. Press the "Mkr
→
" key to open the marker positioning menu.
2. Select the "Search Range Off" menu item.
The R&S
FPC1000 deactivates all search ranges and deletes the vertical lines of
the search ranges.
Marker Configuration
北京海洋兴业科技股份有限公司（证券代码：839145）
www.hyxyyq.com
