
Instrument Setup
FPC1000
34
User Manual 1178.4130.02 ─ 02
LAN
When you are connecting the R&S
FPC1000 to a wired network (LAN), connect the
R&S
FPC1000 with a standard LAN cable to a LAN port. The LAN port of the
R&S
FPC1000 is on its rear panel.
In case of a wired connection, you have to define several network properties to estab-
lish a network connection.
You can either fetch the R&S
FPC1000 network properties automatically from a DHCP
server (Dynamic Host Configuration Protocol) or manually assign a fixed address. With
manual allocation, a fixed IP address and subnet mask must be assigned to the
R&S
FPC1000.
MAC address
The MAC address is the unique identifier of the network adapter built into the
R&S
FPC1000.
You can see the MAC address of your R&S
FPC1000 in a read-only field in the "LAN"
category of the "Instrument Setup" dialog box.
Using a DHCP server
In networks with a DHCP server, the network automatically allocates the network prop-
erties (IP address, subnet mask and gateway).
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "DHCP" menu item in the "LAN" category.
4. Select "On" to activate DHCP.
The R&S
FPC1000 automatically writes the network properties in the correspond-
ing fields ("IP Address", "Subnet Mask" and "Gateway"). This can take several sec-
onds.
Connecting the R&S
FPC1000 to a LAN
If you want to configure the network properties manually, you need a free IP address in
your network that you can assign to your R&S
FPC1000. Kindly ask your IT system
administrator to provide you with an unused IP address (and the other network infor-
mation you need).
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "DHCP" menu item from the "LAN" category.
4. Select "Off" to deactivate DHCP.
When you turn off DHCP, you can define the "IP Address", "Subnet Mask" and
"Gateway" in the corresponding input fields.
Network Configuration
北京海洋兴业科技股份有限公司(证券代码:839145)
www.hyxyyq.com