Raritan Dominion SX II, Administrator'S Manual

Page: 228 / 272

Chapter 6: SX II Administration
221
Command Description Parameters

escapechar - Escape character

encoding - <DEFAULT/US-ASCII/ISO-
8859-1/ISO-8859-15/UTF-8/Shift-JIS/EUC-
JP/EUC-CN/EUC-KR> - Target encoding
type

telnet - TCP port assigned for DPA via
Telnet (1..65535)

multiwrite <true/false> - Port set in multiple
writer mode

suppress <true/false> - Suppress SX
messages when connecting to this
target(true/false)

sendbreak - Duration of sendbreak signal in
ms
DPA Mode Port Config Command Example
The following example configures Direct Port Access. The following port
command sets an IP address for DPA access to the port which is not the
same as DPA by URL. The DPA IP address is just an address that goes
directly to the port.
admin > Config > Port > config port 1
dpaip
10.0.13.1
admin > Config > Services > dpa enable true
•
dpa enable true
- enables IP and port DPA methods for
configured ports
After entering the password, you have direct access to port 1, using the
newly assigned IP specifically for port 1.
admin@10.0.13.1's password:
Escape Sequence is: Control-
You are now master for the port.
The following example configures DPA port settings for DPAIP for range
of ports.
admin > Config > Port > config port 1-32 dpaip 10.0.13.200
or
admin > Config > Port > config port * dpaip 10.0.13.200