Chapter 6: SX II Administration
134
Configure Modem Settings from the Remote Console
Configure modem settings for SX II models with internal, analog modems
on the Modem Settings page. You can also configure modem settings
via command line interface. See
Configure a Modem Using CLI
(on
page 204).
Note: SX II models without internal modems do not have access to the
Modem Settings.
SX II models with internal modems are indicated by an
M
in the model,
such as DSX2-4M. For a list of models. see
SX II Models
(on page 9).
Quickly locate your model by looking under Device Information in the left
panel of the Remote Console.
Connect to the Internal Modem via the Modem Port
•
Use a telephony cable to connect to the Modem port on the SX II.
Configure the Internal Modem
1. Select Device Settings > Modem Settings to open the Modem
Settings page.
Summary of Contents for Dominion SX II
