Raritan Dominion SX II Administrator'S Manual Download Page 53

Page: 53 / 272

Chapter 4: Access Targets

Command Line Interface High-Level Commands

The CLI is menu based. Some commands move to a menu with a
different command set.

The following common commands can be used at all levels of the
command line interface (CLI):

•

top -

Return to the top level of the CLI hierarchy, or the

username

prompt.

•

history -

Displays the last 200 commands the user entered into

the SX II CLI.

•

logout -

Logs the user out of the current session.

•

quit -

Moves the user back one level in the CLI hierarchy.

•

help

- Displays an overview of the CLI syntax.

Summary of Contents for Dominion SX II
















































































































































































































































































Search results

Summary of Contents for Dominion SX II

Reviews:

Related manuals for Dominion SX II

Brands by name

Popular brands

Raritan Dominion SX II, Administrator'S Manual

Search results

Summary of Contents for Dominion SX II

Reviews:

Related manuals for Dominion SX II

Brands by name

Popular brands