Chapter 6: SX II Administration
150
You must also enable port logging. For more information on port logging,
see Enable Port Logging.
Note: The NFS server must have the exported directory with write
permission for the port logging to work.
1. Select the Enable NFS checkbox to enable NFS logging.
2. Type the IP address of the NFS server in the Primary IP field, and
then enter the path to the log file in the Primary Directory field.
3. If you have a backup NFS server, enter the same information for this
server in the Secondary IP field and Secondary Directory fields. If the
primary server fails, port logging is redirected to the secondary
server.
4. If needed, activate the Enable Input Port Logging feature and type a
directory for input in the In Directory field.. To turn this feature off,
deselect this checkbox.
5. Block Port Access on Failure is selected by default.
This feature specifies NFS mount behavior, and NFS behaves as a
soft mount.
When it is a soft mount, NFS is re-mounted if an operation goes
wrong on the file system.
Summary of Contents for Dominion SX II
