Chapter 6: SX II Administration
118
3. Locate the port in the table below the checkboxes, then enter the IP
address you want to assign to the port.
4. Click OK to apply the settings.
Enable Direct Port Access via Username for SSH/Telnet
This feature provides the ability to access DPA through a username and
port combination without requiring a unique IP address or TCP port.
Usage and syntax:
•
ssh -l name[:portname/number] SXIP
Example of access port-#1 as admin:
•
ssh -l admin:1 192.168.51.101
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. In the Direct Port Access section, select the "Enable Direct Port
Access" checkbox and "Enable Direct Port Access via Username for
SSH/Telnet" checkbox.
3. Click OK to apply the settings.
Summary of Contents for Dominion SX II
