Raritan Dominion SX II, Administrator'S Manual

Page: 164 / 272

Chapter 6: SX II Administration
157
12. Alternatively, deselect this and all messages such as "Authentication
successful." These messages are displayed to users when they
connect via direct port access. The default is deselected.
The default is None.
13. Select the Escape Mode.
The escape sequence affects only the CLI. When entering the
escape mode, the user is given a menu of commands that can be
performed (for example, gethistory, power commands, and so forth),
a command to return to the port session, and a command to exit the
port connection.
The default is None.
Change as follows:

Select control from the drop-down menu in the Escape Mode
field.
14. Type the character in the Escape Character field. The default for the
SX II is ] (closed bracket).
Raritan recommends that you do not use [ or Ctrl-[. Either of these
may cause unintended commands, such as invoking the Escape
Command unintentionally. This key sequence is also triggered by the
arrow keys on the keyboard.
15. Type an command in the Exit Command field, such as
logout
.
This is the command that is sent to your system when a user with
write permission disconnects from the port.
The main function of this command is to ensure that the user's
session on the target machine is closed; however, it is not imperative
to have an Exit command configured on a port.
Note: See Configuring Ports for details on port configuration
commands.
16. Select from the Multiple Writers drop-down if you want multiple
clients to be able to write to the port at the same time. The default
behavior is that only one user may have write access to the port at a
single time.