Chapter 5: Raritan Serial Console (RSC) Help
59
Get Write Lock
Write lock prevents other users from taking the write access while you
are using it.
1. To get write lock, choose Emulator > Get Write Lock.
2. If Get Write Lock is not available, a request rejected message
appears.
Write Unlock
To get Write Unlock, choose Emulator > Write Unlock.
Send Break
Some target systems such as Sun Solaris servers require the
transmission of a null character (Break) to generate the OK prompt. This
is equivalent to issuing a STOP-A from the Sun keyboard.
Only users with Write Access privileges can send a break.
To send an intentional “break” to a Sun Solaris server:
1. Verify that you have Write Access. If not, follow the instructions in the
previous section to obtain write access.
2. Choose Emulator > Send Break. A Send Break Ack
(Acknowledgement) message appears.
3. Click OK.
Connected Users
The Connected Users command allows you to view a list of other users
who are currently connected on the same port.
1. Choose Emulator > Connected Users.
Summary of Contents for Dominion SX II
