Raritan Dominion SX II, Administrator'S Manual

Page: 42 / 272

35
Target devices can be accessed from the Remote Console's Port Access
page using Raritan Serial Console (RSC) (RSC), and at-the-rack via
command line interface (CLI).
Targets can also be accessed via Direct Port Access, in which case you
are connected directly to the target via SX II and no intermediate steps
are needed.
This section describes connecting from the Remote Console and CLI.
In This Chapter
Port Action Menu Options - Connect, Disconnect, Power On, Power Off
and Power Cycle Targets ........................................................................ 35
Connect to Targets Using CLI - Connect, Disconnect, Power On, Power Off
and Power Cycle Targets ........................................................................ 41
Port Action Menu Options - Connect, Disconnect, Power On, Power Off and
Power Cycle Targets
Once you log in to SX II via a web browser, the SX II Port Access page
displays. For more information on the Port page, see
SX II Port Access
Page (on page 28).
From the Port Access page, use the Port Action menu to connect,
disconnect, or control power of targets and power strips that are
connected to SX II.
Once connected, you can manage a target with the Raritan Serial
Console (RSC). See
Raritan Serial Console (RSC) Help (on page 47).
Note that you must have permissions to a target or power strip in order to
access it.
To access the Port Action menu for a target or power strip:
1. Hover your mouse over a target's port name in the list and click on
your mouse.
The Port Action menu appears.
Note that only currently available options, depending on the port's
status and availability, are listed in the Port Action menu.
2. Choose the desired menu option for that port to execute it.

Connect to a Target or Power Strip (see " Connect to a
Target " on page 37)

Disconnect from a Target or Power Strip (on page 38)
Chapter 4
Access Targets