Raritan Dominion SX II, Administrator'S Manual

Page: 222 / 272

Chapter 6: SX II Administration
215
Configure Port Logging Settings Using CLI
Note: These settings can also be configured from the Remote Console.
See
Configure Port Logging Settings from the Remote Console (on
page 146).
As part of its security capabilities, SX II logs data and to provide alerts
based on activities between the users, SX II, and the target device.
Audit trail that allows authorities to review what has happened in the
system, determine who implemented what action and when is captured
as part of this function.
Event logging and SNMP traps are also available. Events can be logged
locally using Syslog. Local events are maintained in a 512K per port
buffer and can be stored, reviewed, cleared, or sent periodically to an
FTP server.
Configuration log commands allow you to manage the logging features of
the SX II server.
Enter
admin > Config > Log
to access the menu.
Command Description Parameters
eventlogfile
Use this command to
control and configure the
logging of events to the local
log.

eventlogfile enable<true | false> - System event log
logging.

size <value> - Maximum size of local log file (in
bytes).
If the event log file size exceeds the available flash
memory on your SX II model, the event is not saved.
To avoid this, Raritan recommends you set the file size
to greater than 1024 but less than 10000000.
Note: Each SX II has a different amount of available
flash memory.

style <wrap or flat. - Specifies what action to take
when the maximum size is reached:
wrap will cause the log to circle around when end is
reached.
flat will cause logging to stop when the end is
reached.