Chapter 6: SX II Administration
110
3. Click OK to create the script. A success message is displayed on the
page.
Enable automatic script configuration via TFTP server:
1. Select the "Enable Automatic Script Configuration via TFTP Stick"
checkbox.
2. The TFTP Auto Script Settings section is enabled.
3. Select when scripts are run on the appliances -
Execute Script Only Once - the script will only be executed on the
appliance the first time it boots up and not again. Changes must
be made manually afterward.
Execute Script On Every Bootup If Script Has Changed - updates
are applied to the appliances upon bootup when the script
changes.
Note that SX II only runs a script if it is different from the last
script that was run. This applies regardless of the option selected
here.
SX II remembers most recently executed script, including the
time the script was run.
4. Select how the IP address is configured -
Summary of Contents for Dominion SX II
