Chapter 6: SX II Administration
103
Attribute
Data
NAS-IP-Address (4)
The IP address for the SX II.
User-Name (1)
The user name entered at the login screen.
Acct-Session-ID (44)
Session ID for accounting.
User-Password(2)
The encrypted password.
Accounting-Request(4)
Acct-Status (40)
Start(1) - Starts the accounting.
NAS-Port-Type (61)
VIRTUAL (5) for network connections.
NAS-Port (5)
Always 0.
NAS-IP-Address (4)
The IP address for the SX II.
User-Name (1)
The user name entered at the login screen.
Acct-Session-ID (44)
Session ID for accounting.
Log out
Accounting-Request(4)
Acct-Status (40)
Stop(2) - Stops the accounting
NAS-Port-Type (61)
VIRTUAL (5) for network connections.
NAS-Port (5)
Always 0.
NAS-IP-Address (4)
The IP address for the SX II.
User-Name (1)
The user name entered at the login screen.
Acct-Session-ID (44)
Session ID for accounting.
Enable Authentication
Note: When configuring the server, the user-group format for
the user on the server should contain the name of a group configured on
SX II.
When configuring the server, a dominionsx service should be
added. A user-group attribute under this service should contain the name
of a group configured on the SX II . A user-dialback field under this
service would contain the modem dialback number for this user.
You can use the Terminal Access Controller Access-Control System
Plus () to authenticate SX II users instead of using local
authentication.
1. Click User Management > Authentication Settings to open the
Authentication Settings page.
Summary of Contents for Dominion SX II
