Chapter 6: SX II Administration
104
2. Click the radio button to enable the section of
the page.
The section expands. If it does not, click the section header to
expand it.
3. Under Primary , type the IP address of the
server and the port on which it is listening (default is 49) in the IP
Address and Port fields.
4. Fill in the Shared Secret field. Also known as a key, this field is
necessary for encryption and mutual identification with the
server.
5. The Timeout is recorded in seconds and default timeout is 1 second,
but can be changed as required.
6. The timeout is the length of time the SX II waits for a response from
the server before sending another authentication request.
7. The default number of retries is 3 Retries.
This is the number of times the SX II will send an authentication
request to the server.
8. If you have a backup server, enter the same information
in the Secondary fields.
Summary of Contents for Dominion SX II
