Raritan Dominion SX II, Administrator'S Manual

Page: 212 / 272

Chapter 6: SX II Administration
205
If needed, assign users to a group with Modem Access permissions.
Modem Access permission is assigned to a user group on the Group
page, and the user is then assigned to the group on the User page.
For more information, see Configure and Manage Users and User
Groups Using CLI (on page 197) or Configure and Manage Users and
Groups from the Remote Console (on page 76).
Server Settings to Support Modems
Primary (or/and Secondary) RADIUS Server Settings should be
configured correctly and enabled on SX II.
•
On the Remote RADIUS Server, the user's configuration should
contain the following line.
Filter-Id = "raritan:G{<local user group>}:D{<number for
dialback>}"
The LDAP server user's configuration should contain the dialback
number in the attribute that is configured as the 'dialback search
string' on SX II.
Dialback with remote LDAP user (OpenLdap v.2 & v.3)
•
Dialback with remote user (+ v.4.0.3a)
Dial-in and Dialback should be enabled on SX II used for modem
communication. Primary (or/and Secondary) Server
Settings should be configured correctly and enabled on SX IIs.
On the Remote Server user's configuration should own the
following line .
user-dialback='129'
Run an Autoconfiguration Script Using CLI
Note: These functions can also be configured from the Remote Console.
See
Auto Script Configuration from the Remote Console (see
" Enable Auto Script from the Remote Console for Use with TFTP or
a USB Stick " on page 108).
Enter
admin
>
config >
to access the menu.
Command Description Parameters
autoconfig Set and get Automatic Script
Configuration.

enable <true/false> - enable (true), disable
(false)

run <once/every> - Run script once or at
every boot

source <manual/dhcp> - Use TFTP address