Chapter 6: SX II Administration
109
•
Save the file to USB stick. The file can then be brought to each
appliance and used to configure it.
1. Access and configure the SX II you want to create a configuration file
from.
2. Select Device Settings > Auto Configuration.
3. The name of the script is listed at the top of the Auto Script
Configuration section. Read-only
Enable automatic script configuration via USB stick:
1. Prepare your USB stick and then plug it in to a USB port on the front
or back of SX II. See
Prepare a USB Stick for an Auto
Configuration File
(on page 111).
2. Select the "Enable Automatic Script Configuration via USB Stick"
checkbox.
Summary of Contents for Dominion SX II
