Chapter 6: SX II Administration
124
Configure SNMP Agents from the Remote Console
SNMP-compliant devices, called agents, store data about themselves in
Management Information Bases (MIBs) and return this data to the SNMP
managers. See
Viewing the SX II MIB
(on page 130) for information on
viewing the SX II MIB.
SX II supports SNMP logging for SNMP v1/v2c and/or v3. SNMP v1/v2c
defines message formats and protocol operations when SNMP logging is
enabled. SNMP v3 is a security extension of SNMP that provides user
authentication, password management and encryption.
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Select the Enable SNMP Daemon checkbox to activate to the SNMP
section.
3. Provide the following SNMP agent identifier information for the MIB-II
System Group objects:
System Name - the SNMP agent's name/appliance name
System Contact - the contact name related to the appliance
System Location - the location of the appliance
4. Select either or both Enable SNMP v1/v2c and Enable SNMP v3. At
least one option must be selected.
Required
5. Complete the following fields for SNMP v1/v2c (if needed):
Summary of Contents for Dominion SX II
