Raritan Dominion SX II, Administrator'S Manual

Page: 103 / 272

Chapter 6: SX II Administration
96
10. The default Secure LDAP Port is 636. Either use the default port or
specify another port. This field is only used when the Enable Secure
LDAP checkbox is selected.
11. Select the "Enable LDAPS Server Certificate Validation" checkbox to
use the previously uploaded root CA certificate file to validate the
certificate provided by the server.
If you do not want to use the previously uploaded root CA certificate
file, leave this checkbox deselected.
Disabling this function is the equivalent of accepting a certificate that
has been signed by an unknown certifying authority. This checkbox is
only available when the Enable Secure LDAP checkbox has been
enabled.
Note: When the Enable LDAPS Server Certificate Validation option is
selected, in addition to using the Root CA certificate for validation,
the server hostname must match the common name provided in the
server certificate.
12. If needed, upload the Root CA Certificate File.
This field is enabled when the Enable Secure LDAP option is
selected.
Consult your authentication server administrator to get the CA
certificate file in Base64 encoded X-509 format for the LDAP/LDAPS
server.
Use Browse to navigate to the certificate file.
If you are replacing a certificate for the LDAP/LDAPS server with a
new certificate, you must reboot the SX II in order for the new
certificate to take effect.
Test LDAP Server Access
13. To test the LDAP configuration, enter the login name and password
in the "Login for testing" field and the "Password for testing" field,
respectively. Click Test.
This is the username and password you entered to access the SX II.
It is also username and password the LDAP server uses to
authenticate you.