Chapter 6: SX II Administration
156
2. Set Encoding if you want Raritan Serial Console (RSC) to always
use a specific character encoding for this port.
Encoding overrides the global RSC setting for the port to whatever
value you set.
The choices are: DEFAULT,US-ASCII,ISO8859-1, ISO8859-15,UTF-
8, Shift-JIS, EUC-JP, EUC-CN, EdUC-KR.
3. In the Detect field, indicate whether you want the SX II to
automatically detect a physical connection to the target. The default
is Auto Detection.
Another option is to select Force DTE, in which case SX II acts as a
piece of data terminal detection equipment to detect targets
connected to it.
Or, you can select Force DCE, in which case SX II acts as a piece of
data communications equipment to detect equipment connected to it.
Note: If the target has the ability to autodetect either DTE or DCE,
you must select either Force DTE or Force DCE for the port. SX II
does not support autodetection of both DCE and DTE on the same
port.
4. Select the value of Bits Per Second from the Bits Per Second drop-
down menu.
5. Select the Parity Bits from the Parity Bits drop-down menu.
6. Select the Flow Control from the Flow Control drop-down menu.
7. If you need to configure the delay between when individual
characters are sent via the port, enter the time in milliseconds in the
Char Delay field.
8. To configure the delay between when lines of text are sent via the
port, enter it in the Line Delay field.
9. Configure the sendbreak duration by entering the send break time in
the Send Break Duration field. The send break is configurable from
0ms - 1000ms.
10. Select Always Active if you want to log activities coming into a port
even if no user is connected.
The default option is to not maintain port access without a connected
user, which means ignore data coming into a port when no user is
connected.
This option is for port data logs.
Note: When no users are logged into a port session, port traffic, by
default, is discarded .
11. If you do not want messages displayed to users connecting to SX II
via Direct Port Access, select the Suppress Message checkbox.
Summary of Contents for Dominion SX II
