Chapter 2: Configure SX II for the First Time
15
Set the CLI Escape Sequence
The escape key sequence is user-configurable and can be configured
per port.
The escape sequence is programmable per port because different target
operating systems and host applications may trap different escape key
sequences.
Ensure the default escape sequence set on the SX II server does not
conflict with a key sequence required by either the access application or
the host operating system.
The console sub-mode should be displayed when the default escape key
sequence ^] is pressed.
Raritan recommends that you
do not
use [ or Ctrl-[. Either of these may
cause unintended commands, such as invoking the Escape Command
unintentionally. This key sequence is also triggered by the arrow keys on
the keyboard.
Summary of Contents for Dominion SX II
