Chapter 4: Access Targets
41
Power Cycle a Target or Power Strip
Power cycling allows you to turn a target or power strip off and then back
on through the outlet it is plugged into.
This option is visible only when -
•
there are one or more power associations to the target or power strip
•
you have permission to manage the power
You can also perform these actions through Raritan Serial Console
(RSC) and command line interface. See
Raritan Serial Console (RSC)
Help
(on page 47) and
Connect to Targets Using CLI - Connect,
Disconnect, Power On, Power Off and Power Cycle Targets
(on page
41).
Connect to Targets Using CLI - Connect, Disconnect, Power On, Power Off
and Power Cycle Targets
Before connecting to a target, the terminal emulation and escape
sequence must be configured. See
Set Terminal Emulation on a
Target
(on page 14) and
Set the CLI Escape Sequence
(on page 15).
Connect the SX II While at the Rack
While at the rack, do one of the following depending on your needs -
Connect a computer to the Terminal port.
Summary of Contents for Dominion SX II
