Raritan Dominion SX II, Administrator'S Manual

Page: 134 / 272

Chapter 6: SX II Administration
127
Trap Description
networkFailure An Ethernet interface of the product can no longer communicate
over the network.
networkParameterChanged A change has been made to the network parameters.
networkParameterChangedv2 A change has been made to network parameters when working in
dual LAN isolation mode.
passwordSettingsChanged Strong password settings have changed.
pduConnected A power strip was connected to SX II.
pduDisconnected A power strip was disconnected from SX II.
portConnect A previously authenticated user has begun a session.
portConnectv2 When in dual LAN isolation mode, a previously authenticated user
has begun a session using a separate IP address.
portConnectionDenied A connection to the target port was denied.
portDisconnect A user engaging in a session closes the session properly.
portDisconnectv2 When in dual LAN isolation mode, a user engaging in a session
closes the session properly.
portStatusChange The port has become unavailable.
powerNotification The power outlet status notification: 1=Active, 0=Inactive.
powerOutletNotification Power strip device outlet status notification.
rebootCompleted The SX II has completed its reboot.
rebootStarted The SX II has begun to reboot, either through cycling power to the
system or by a warm reboot from the OS.
securityBannerAction Security banner was accepted or rejected.
securityBannerChanged A change has been made to the security banner.
securityViolation Security violation.
setDateTime The date and time for the device has been set.
setFIPSMode FIPS mode has been enabled.
startCCManagement The device has been put under CommandCenter Management.
stopCCManagement The device has been removed from CommandCenter Management.
sxPortAlert An alert was triggered for the port.
userAdded A user has been added to the system.
userAuthenticationFailure A user attempted to log in without a correct username and/or
password.
userDisconnectedFromPort A user disconnected from a target port properly.