![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686239.webp)
Scalar i6000 Installation Guide
227
•
Select
Linear
to display the screen saver image as a floating image.
Enter values in the
horizontal
and
vertical
boxes to specify the movement of the screen saver
image in pixels.
Enter a value in the
Motion Delay
box to specify the movement speed of the screen saver image.
5
Under
Images
, specify the image files to display for normal functions, warning notices, and failure
notices. You must select image files for all three functions.
To specify an image file, click
Browse
. Select the image file and then click
Open
. The image file must
be in GIF, JPEG, or PNG format, and cannot be larger than 1 MB. In addition, image resolution is limited
to 600 x 800 pixels.
Click
Preview
to preview an image file.
6
Click
OK
to save the settings and close the
Preferences
dialog box.
Or click
Apply
to save the settings without closing the
Preferences
dialog box.
If you previously made system configuration changes, you are prompted to save the configuration
changes. For more information, see
Summary of Contents for Scalar i6000
