![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686319.webp)
Scalar i6000 Installation Guide
307
Installation Testing and Verification
This chapter contains testing procedures for performing the following:
•
Verifying the Hardware Installation
•
Installation Verification Test Overview
•
Running the Installation Verification Test
•
Completing the Installation Verification Checklist
Verifying the Hardware Installation
To verify the hardware, follow these steps:
1
Verify that the library is leveled based on the instructions in
Installing a Stand-Alone Control Module
Installing a Multi-Module Library
2
Close the access door.
3
Verify that the
Robotics
Enabled
and
Status
indicators above the Library Management Console (LMC)
are illuminated in solid green state.
Robotics Enabled
indicator/button
Status
indicator
Power
indicator/button
touch screen
Summary of Contents for Scalar i6000
