![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686252.webp)
240
Adding Optional Hardware
Adding a Power Supply Chassis
Required tools: 7 mm socket wrench, ESD strap
1
Shut down the library.
For more information, see
2
Open the service door on the control module or expansion module where you are adding the power
supply chassis.
3
Attach the ESD strap to your wrist and to an unpainted surface inside the door.
4
On the power distribution unit(s), set the circuit breaker switch to the down (0) position.
5
Remove the four thumbscrews retaining the cover plate from the power chassis opening.
6
Remove the LBX cover plate.
7
Unpack the power chassis.
thumbscrews
thumbscrews
Summary of Contents for Scalar i6000
