Scalar i6000 Installation Guide
349
LBX Terminator
For information on the LBX board, see
on page 345. For information on interpreting the LBX
terminator LEDs, see
Interpreting LBX Terminator LEDs
Figure 39
Comparison of LBX Terminator Versions
Figure 40
LBX Board and Terminator Installed
Note
• Any LBX board version LBX2 Gen 1 located in the last module in the library
must be terminated using LBX terminator version 01 shown in
.
• Any LBX board version LBX2 Gen 2 located in the last module in the library
must be terminated using LBX terminator version 03 shown in
.
• Any LBX board version LBX2 Gen 3 located in the last module in the library
must be terminated using LBX terminator version 03 shown in
Version 01
Version 03
LBX board
LBX terminator
Summary of Contents for Scalar i6000
