Scalar i2000 Installation Guide
239
The
Working
screen appears. Once the teach is completed, a message appears in the
Results
field,
for example, “Command Completed.”
28
Add the new drive(s) to a partition using the following procedure:
a. Log into the LMC as service user.
b. Click
Setup
→
Partitions
→
Configure.
The
Partitions
dialog box is displayed.
c. Select the partition that include the affected magazines and click
Modify.
d. Select a partition and add the new drive(s).
29
To avoid confusion, add the affected magazines back into the appropriate partition. The partition should
be the same size as the original partition.
Note
Due to licensing requirements, the physical location of the affected magazines
may not be available until the procedures completes.
Summary of Contents for Scalar i6000
