![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686174.webp)
162
Configuring the Library
11
Click
Next
.
The
Date and Time
dialog box appears. To set the date and time, either enter the iPv4 or iPv6
addresses of the two NTP servers on your network or set the date and time manually.
12
When you reach the end of the Setup Wizard, click
Finish
to exit.
13
To log off, click
Operation
→
Log Off
.
14
Continue with the setup and configuration of the library:
•
Optionally set up e-mail, using the instructions in
•
Optionally set up e-mail notification using the instructions in
Once you have completed the configuration, proceed to
Installing Cartridges
on page 131.
Summary of Contents for Scalar i6000
