12
Getting Started
A
verify the
hardware
configure library
configuration
Verifying the Hardware Installation
the procedure you should use to verify the hardware
configuration.
Installation Verification Test Overview
on page 309 must also be performed.
on page 153 tells you how to
set up the library.
on page 131 gives the
instructions for installing the cartridges in the two
supported methods.
install
Completing the Installation Verification Checklist
page 332, provides a checklist that helps you
determine if all necessary steps have been completed
during the installation of the library.
complete the
installation
checklist
cartridges
done
add
optional
hardware?
on page 231 provides
instructions for the following optional hardware:
yes
no
install optional
hardware
Summary of Contents for Scalar i6000
