![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686162.webp)
150
Setting up Your Library for Access
1
Click the
LMC
tab on the
Security Configuration
dialog box.
2
Change the security settings for any of the following items:
•
Remote Access
— To prevent all remote LMC clients from accessing the library, select
Disable
. To allow them to access the library, select
Enable.
(The
Network Interface
option is
unavailable when accessing the LMC remotely.).
Select
Use SSL
to enable secure communication between the LMC client and the library.
•
Callback Port Range
— To configure firewall access for server callbacks to remote clients,
type the first port number of a range of ports that you want to be used for callbacks in the
Starting
text box, and then type the last port number in the
Ending
text box. Valid port ranges
must fit within the range 1024 to 65535. Remote client service ports must be within the range
of ports specified here. Otherwise, callbacks fail because the library’s firewall blocks outbound
packets designated for out-of-range ports.
•
Service Login
— To allow service login, select
Enable
. To prevent service login, select
Disable
. The Admin user can enable or disable the service user login on both the front panel
access and the remote client access.
•
Session
— To configure the length of the session’s timeout, type or use the arrow buttons to
specify the length of a session before it times out. Valid session timeouts are 1-1440 minutes
(1 minute - 24 hours), where the default is 30 minutes.
3
If you want to apply the changes, but you do not want to close the dialog box, click
Apply
. Otherwise,
click
OK
to apply the changes and close the dialog box.
Note
Enabling SSL can impact the network performance of remote operations
(for example, downloading new library software).
Note
The default service login through the service port is still available for use.
For security purposes, the service port can be physically locked down by
locking the back door of the i6000.
Summary of Contents for Scalar i6000
