![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686282.webp)
270
Adding Optional Hardware
6
Open the access door of the expansion module that is to receive the I/E station.
7
Remove the magazines in columns 1 through 4, sections 1 through 5 of rack 2 to access screws and to
make room for the I/E station. Also removing the magazines in columns 3 and 4, section 6 provides
additional space when installing the I/E station.
Note
Make a note of the target magazine location when it is removed. Keep this
magazine within reach. You will need it to perform
this procedure.
If you are adding the I/E station to the control module, none of the
magazines in column 4 will be present.
se
ct
io
n
column
1
4
3
2
2
1
8
5
7
3
4
6
9
10
1
4
3
2
2
1
8
5
7
3
4
6
9
10
I/E station location
remove all magazines
inside the boxed area
Summary of Contents for Scalar i6000
