Scalar i6000 Installation Guide
143
Follow these instructions to bulk load the magazines.
1
From the LMC, select a partition using the
View
menu.
You are prompted to take the partition offline.
2
When prompted to take the partition offline, click
Yes
.
3
Press the
Robotics Enabled
button.
4
Open the access door of the control module or expansion module.
5
When you have completed your bulk load, make sure all cartridges are inserted completely.
6
Close the access door of the control module or expansion module.
7
Press the
Robotics Enabled
button.
8
Run the
Inventory
command by clicking
Operations
→
Inventory
from the LMC.
Click
OK
to start the inventory. You are prompted when the inventory is complete.
You are now ready to continue installation with the instructions in
Summary of Contents for Scalar i6000
