![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686114.webp)
102
Installing Drives and Blades
FC I/O Blade Numbering Sequence
Quantum has requirements for connecting FC I/O blades to drives.
shows the numbering (bottom
to top) on the FC I/O blades. There can be a maximum of four drives connected to each FC I/O blade
installed in the I/O management unit. FC-1 and FC-2 are reserved for connections to the SAN or hosts.
Figure 8
Fibre Channel I/O Blade Connection Numbering Sequence
reserved for connections
to Fibre Channel drives
reserved for connections to the
storage area network (SAN) or
directly to hosts
FC-2
F
C
-3
FC-
4
FC-1
FC-
6
FC-
5
LEDs
Summary of Contents for Scalar i6000
