![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686300.webp)
288
Adding Optional Hardware
19
To lighten the weight of the access door you are replacing, uninstall the magazines prior to removing
the door.
20
If a 24-slot I/E station exists, disconnect the I/E station cable from the I/E lock and release the cable
from the Velcro straps securing it to the cable carrier.
21
Use the supplied hex wrench to remove the two screws that secure the flex cable bracket to the top of
the expansion module. The flex cable bracket will not be used with the 72-slot I/E station upgrade.
CAUTION
Use caution when removing the screws securing the spring-loaded
flex cable bracket.
W6 cable
2 screws
2 screws
Summary of Contents for Scalar i6000
