![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686199.webp)
Scalar i6000 Installation Guide
187
Table 7
shows an example of how the return media identifier behavior works depending on which
setting you choose:
Disabled
,
Prefix
,
Suffix
, and
Pass Through
. The bold, underlined portion
represents the media identifier.
For more information on how media policies in the library work, see the library
Scalar i6000 User’s
Guide
.
•
For
Automatic Drive Cleaning
, click either
Enable
or
Disable
. This setting is enabled by default.
Enabling automatic drive cleaning allows the library to initiate drive cleaning each time a drive
requests a cleaning operation. For automatic drive cleaning to function, you must first configure
drive cleaning for the library. For more information about configuring drive cleaning, see
Configuring Drive Cleaning
on page 214.
7
Select
Next
to proceed.
8
In the
Choose Resource Allocation Mode
dialog box, select either
Simple
or
Expert
.
9
Select
Next
to proceed.
To continue in
Simple
mode, see
Performing Simple Partition Resource Allocation
To continue in
Expert
mode, see
Performing Expert Partition Resource Allocation
Table 8
Return Media Identifier Behavior Example
Actual LTO-1 Barcode Label
ABC123
L1
Behavior
Volume serial number returned to Host
Disabled
ABC123
Prefix
L1
ABC123
Suffix
ABC123
L1
Pass Through
ABC123
L1
Note
Once a media volume serial number has been reported to a host, changing
the Return Media Identifier setting may cause the host to not recognize
media within the library.
Note
Automatic drive cleaning should be enabled for partitions only if the host
application does not support the coordination of drive cleaning. If drive
cleaning functionality is enabled on the host application, do
not
enable
automatic drive cleaning for any partitions in the library.
Summary of Contents for Scalar i6000
