![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686173.webp)
Scalar i6000 Installation Guide
161
9
To configure the LUN mapping for the drives, select the type of drives you have.
Depending on the drive type you selected, see the following for detailed instructions:
•
•
10
Click
Next
.
In the
Network Configuration
dialog box, you can set the following configuration:
•
If Dynamic Host Configuration Protocol (DHCP) is enabled on your network, select
Enable
. DHCP
automatically configures the library network settings.
•
If you do not have DHCP enabled on your network, select
Disable
and type the library name, IP
address, subnet mast, and the IP address of the default gateway for your network.
•
Under
Port Settings
, select
Enable
or
Disable
for
Auto Negotiation
and then select a
Port
Speed
.
Summary of Contents for Scalar i6000
