TI02-134ENG-REV4
SIRCHIE
®
100 HUNTER PLACE, YOUNGSVILLE, NC 27596 USA
Ph: (919) 554-2244, (800) 356-7311 • Fax: (919) 554-2266, (800) 899-8181 • Web: www.sirchie.com • Email: [email protected]
Products • Vehicles • training
1 of 8
Copyright©
2011 by
SIRCHIE
All Rights Reserved.
TECHNICAL INFORMATION
Fingerprint Bench Assembly
Catalog Nos. FPT-Series and PFT-Series (all inclusive)
INTRODUCTION
Use these instructions for assembly of all SIRCHIE fingerprint
benches.
Note: Inspect all cartons for damage. If damage is found,
contact the delivery carrier immediately.
Carefully unpack the carton(s) and check for all parts against the list
at the end of these instructions to insure that you have everything
needed for assembly. If a part is found to be missing, please contact
the factory for prompt service. Assembly should be done on a clean,
soft cloth or other nonabrasive surface.
PROCEDURE
For All Bench Assemblies
1. Assemble divider insert to center divider with four 6-32 x 1/4"
pan head screws (Fig. 1).
FIGURE 1
SFL1009
Divider Insert
SFL1008
Center
Divider
SFL225
